Add a configurator context to a work package

By default, Teamcenter Easy Plan derives the configurator context for a work package from the engineering bill of materials (EBOM). However, during process planning you can manually add a configurator context to a work package.

Restrictions and limitations

You must set the EP_WorkPackageContentType value to the following:

• EBOM:PSBOMViewRevision:config1

• MBOM:PSBOMViewRevision:config1

• Plant:PSBOMViewRevision:config1

• PlantBOP:PSBOMViewRevision:config1

• ProductBOP:PSBOMViewRevision:config1

• ProductionProgram:PSBOMViewRevision:config1

Procedure

1. If you have not done so already, search for an existing work package and navigate to the Manage Work Package page.

2. On a work package tile, click … → Set.

Teamcenter Easy Plan displays the Set Configurator Context to Work Package dialog box so you can locate a configurator context and associate it to structures in the work package.

3. Type a full or partial name, click Search, and then select a search result.

4. Click Set Configurator Context and then click Associate in the confirmation dialog box.

Teamcenter Easy Plan associates the configurator context to:

Structures that are currently in the work package.

Structures added to the work package in the future.

5. (Optional) Add a structure to the work package.

Teamcenter Easy Plan performs one of the following actions:

If the structure is not associated to a configurator context, Teamcenter Easy Plan associates the structure to the configurator context and adds it to the work package.

If the structure is associated to a different configurator context than the work package, Teamcenter Easy Plan displays an error message and does not associate it to the configurator context or add it to the work package.

6. (Optional) On any tile in the Manage Work Package page click Remove, and then click Remove in the confirmation dialog box.

Teamcenter Easy Plan removes the association between the configurator context and all structures within the work package.