Run and validate the sample tests with Teamcenter Easy Plan

After you install the sample tests, you can run and validate the tests to verify that they operate correctly in your environment.

Note

The Teamcenter administrator performs this task. This process works only for classic bill of process (BOP) structures.

1. Start the Teamcenter Easy Plan application.

2. Search for and open an existing work package and navigate to the High Level Planning page.

3. Expand the structure, select an assembly, and click Work Instructions Authoring.

4. In the Process tab, select a process or operation and in the page toolbar, click Open Validation Checks .

   The Validation Checks panel opens.

5. In the Process panel, select a process or operation to be validated and in the Validation Checks panel, click Run Validation Checks .

6. Select a line in the Validation Checks table to view additional information in the Details section.

   Note Information in Details includes the following.

   Test Name—lists the names of tests run on that line.
   
   
   Message Type—lists the types of messages generated for the tests.
   
    
     Info—The test results contain benign information. You do not need to resolve Info message types.
    
    
     Error—The test failed. You must resolve all errors for the process or operation before you release data.
    
   
   
   
   Message—lists detailed information about the test results. Use this information to resolve any failed validations.
   

7. Review and analyze the results, and perform one of the following actions:

   If all validation checks pass, you do not need to perform any further action. The process or operation is ready for release.

   If one or more validation checks fail, you must resolve the failed items for each line. If you still do not get the correct validation results, contact Product Lifecycle Management Support or your Teamcenter account team for assistance.

8. Click Close Validation Checks .

9. (Optional) Select the original object and run validation checks again to confirm that you have resolved all failed tests.

   When all validation checks pass, the assembly is ready for release.