Configure NX Library

manually

Your enterprise installs NX using a shared MACH directory, there are several steps that you must perform manually. These steps mirror the steps automatically performed by the Configure NX Library using the installation wizard procedure performed when you use a local MACH directory.

This procedure pertains to the following files:

---

• MACH\resource\configuration\cam_part_planner_mrl.dat

• MACH\resource\library\tool\inclass\dbc_mrl_tooling_library_tlas.tcl

• MACH\resource\library\tool\inclass\dbc_mrl_tooling_library_tlas_en.def

• MACH\resource\ug_library\dbc_mrl_general.tcl

---

• MACH/resource/configuration/cam_part_planner_mrl.dat

• MACH/resource/library/tool/inclass/dbc_mrl_tooling_library_tlas.tcl

• MACH/resource/library/tool/inclass/dbc_mrl_tooling_library_tlas_en.def

• MACH/resource/ug_library/dbc_mrl_general.tcl

Procedure

1. Create a copy of your cam_part_planner_library.dat file and rename it to cam_part_planner_mrl.dat.

2. Change the following line in the cam_part_planner_mrl.dat file:Old:CopyLIBRARY_TOOL,${UGII_CAM_LIBRARY_TOOL_INCLASS_DIR}dbc_inclass_tlas.def, ${UGII_CAM_LIBRARY_TOOL_INCLASS_DIR}dbc_inclass_tlas.tclNew:CopyLIBRARY_TOOL,${UGII_CAM_LIBRARY_TOOL_INCLASS_DIR}dbc_mrl_tooling_library_tlas_en.def, ${UGII_CAM_LIBRARY_TOOL_INCLASS_DIR}dbc_mrl_tooling_library_tlas.tcl

If you use a customized configuration file at your company, make the change in the customized file and continue to use this file to initialize NX CAM.

3. Copy the following files to your MACH\resource\library\tool\inclass\MACH/resource/library/tool/inclass/ directory.

dbc_mrl_tooling_library_tlas.tcl

dbc_mrl_tooling_library_tlas_en.def

4. Copy dbc_mrl_general.tcl to MACH\resource\ug_libraryMACH/resource/ug_library.

5. When you initialize NX CAM, use the modified cam_part_planner_mrl.dat file or the customized configuration file that you modified in step 2.