Configure

NX CMM library using the installation wizard

When you install the inspection library data, you can configure the NX Library so the new data appears in the library selection dialog boxes when you search in NX CMM for classified resources, such as tools, machines, or devices.

Perform this configuration on the client on which NX is installed. If your environment includes a shared CMM_INSPECTION directory, see Configure NX Library manually or Modifying PAX files to include MRL setup sheet templates.

Note

Before you begin installation, make sure you have the latest available version of the Manufacturing Resource Library (MRL). If a later version is available, download and extract the latest version and browse to the advanced_installations directory in the location of the extracted files.

For information about later versions, see Support Center.

Procedure

1. In the Teamcenter software kit advanced_installations directory, locate the advanced_installations.zip file and unzip it to a local directory.

2. In the resource_management directory, click Setup.exe.

The Manufacturing Resource Library installer Setup Type Selection dialog box is displayed.

3. In the Setup Type Selection dialog box, select Configure NX CMM.

Note You can also select additional options.

Full Manufacturing Resource Library (MRL) installation setup:Note Full MRL installation includes the NX CMM configuration and populates the class hierarchy.

MRL NX configuration utility:Note MRL NX configuration utility installs only the NX configuration, without the class hierarchy.

4. Click Next.

The NX CMM Resource Base Directory dialog box is displayed.

5. In the NX CMM Resource Base Directory dialog box, enter the path to the NX CMM resource base directory on this system, and click Next.

Note This directory is where the NX CMM specific configuration files are stored, typically in the directory (UGII_BASE_DIR)\CMM_INSPECTION\resource.

6. In the Confirm Selections dialog box review your selections, and click Next.

Teamcenter performs the following actions:

Copies the definition files to the target directory.

Copies event handler files to the target directory.

Copies the images for the NX CMM tool dialog boxes to the target directory.

A message confirms the task is complete.

For more information, see Installation wizard for Manufacturing Resource Library.